Equipment

1. Coral2K® Application
2. Fixed Node
3. Node of Monitoring
Multi-Switch Node
4. Programmer

Here it’s possible to check a list of the equipment used by ISIS Engineering for the management and deployment of wireless sensor and actuator networks. The software systems have been designed entirely by ISIS, whereas the hardware elements are made according to the specifications of our engineers. Attached, you can find every element image and description.

Coral2K® is the tool software designed by ISIS Engineering for the monitoring and control of environments across wireless sensors and actuators networks (WSAN).

Its architecture allows that the system be configured to adapt to any environment of deployment of the wireless network (offices, tunnels, mines, hospitals, etc.). This allows the utilization of the sensors and actuators more adapted for the needs of every situation.

The software Coral2K® has been designed to facilitate the scalability of the wireless networks. The result is a friendly application for the user, who will be able to visualize the condition of the network, to configure it and to define alarms of simple form, according to his requirements.

It is about the principal units of our wireless networks.

Models with sensors or without them are available. The nodes without sensors are used to the transmission of the information and to the monitoring of the mobile nodes in location systems. The models with sensors include by default sensors of temperature, dampness and luminosity, but any other one can be added, depending on the needs of the network: CO, CO2, movement, volume of water, etc. They can also be connected to different actuators for the automatic control of systems of lighting and climatization.

The fixed nodes can be used both in interiors and in exteriors, through a special packing.

Technical specifications (interior):

• Compatible with IEEE 802.15.4
• Range: 50 meters in interior and 300 in exterior (with internal antenna).
• It is applicable to several kilometers with external antenna.
• Optional Sensors/Actuators.
• 3 button of function and 3 indicators leds, all of them configurable.
• Supply: batteries AA / power supply.
• Indicator of the batteries state.
• Dimensions: 117 x 79 x 24 mm.

Technical specifications (exterior):

• Compatible with IEEE 802.15.4
• Range: 50 meters in interior and 300 in exterior (with internal antenna).
• It is applicable to several kilometers with external antenna.
• Optional Sensors/Actuators.
• 3 button of function and 3 indicators leds, all of them configurable.
• Power Supply: 220V AC.
• Protection;n: IP65.
• Dimensions: 179 x 199 x 71,5 mm.

This small wireless unit can be worn in a comfortable way in the wrist or in the waist and has been designed to be used in the monitoring systems and prevention of risks and accidents (workers ‘safety, detection of falls of elder people, etc.). The node of monitoring receives an alarm notices in real time and can also send it when it detects a situation of danger or when the user considers it necessary.

Technical specifications:

• Compatible with IEEE 802.15.4
• Range: 50 meters in interior and 300 in exterior.
• Radio de alcance: 50 metros en interior y 300 en exterior
• Vibrator for the receipt of alarms and accelerometer of 3 integrated axles.
• A sending button of alarm and one of configurable function.
• 3 configurable indicators leds
• Rechargeable battery.
• Indicator of the batteries state.
• Dimensions: 117 x 79 x 24 mm.

Device designed for the automatic control of electrical devices. It is about a variant of the fixed node, that besides possessing the same capacities that this one, it has 8 relays that allow the activation or not of different electrical devices across the WSN

Technical specifications:

• 8 relays (switches)
• Power Supply: 250 VAC / 8 A
• Dimensions: 182 x 180 x 63 mm

USB/SERIAL Interface for the programming of devices and communication with PC.

Technical specifications:

• USB/serial: Mini USB type B
• Bus: 10 pins
• Dimensions: 65 x 65 x 28 mm